Movement Clock Quartz Mechanism Battery Operated DIY Repair Part Replacement KIT

Description

Movement shaft: 14.5 mm(0.57 inch), thread length 6.7 mm(0.26 inch). Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches) Hour hand length: approx. 80 mm (3.15 inches) Minute hand length: approx. 120 mm (4.7 inches) Second hand length: approx. 100 mm (3.9 inches)
Jumping clock movement, suitable for 1 - 3 mm(0.04 inch-0.12 inch) thickness clock panel
Long spindle quartz clock replacement movement parts with plastic hook, Good for repairing, replacing, or making a clock. Simple and elegant design, these replacement parts suit well different styles of clock frames.
Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.
Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.
(=^ ^=)💕 WELCOME TO DEEWISH STORE 💕(=^ ^=) 💕Features: Easy and simple design Suitable for repairing, replacing or making a clock Material: plastic and aluminum Second hand motion: Step Accuracy Within ±30seconds deviation each month (in normal temperature) Battery: one 1.5V AA batteries only,not included. Please DO NOT USE Alkaline battery, Rechargeable batteries,they will damage the movement. 💕Dimensions: (Measure from the hole) Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches) Hour hand length: approx. 80 mm (3.15 inches) Minute hand length: approx. 120 mm (4.7 inches) Second hand length: approx. 100 mm (3.9 inches) 💕Package included: 1 x Quartz clock movement with plastic hook 1 x Second close nut 1 x Minute hand 1 x Hour hand 1 x Second hand 1 X Plastic washer 1 X Brass washer 1 X Brass nut
PEACH-STORE
THE BEST FOR YOU
🟨 Kindly note 🟨:
If you would like to order more quantity than shown is available, you are welcome to place one order fox maximum available quantity and place one more order again because we always have more, than shows in available items.